Place it on level ground with at least 2 meters of free space in front. Connect it to a safe outdoor power outlet.
Make sure your lawn is clean and flat and cut your lawn to a height of no more than 6 cm (3.6 inches for the US and Canada) before setup. Make sure children and pets are off the lawn.
Choose an open, flat area with a clear sky view. Avoid walls, fences, or trees that block GPS signals.
No, you do not need to purchase a 4G module. The mower comes with a built-in 4G module, and we provide one year of free 4G data upon your first activation. After the free one-year period ends, you will need to renew the 4G data subscription if you wish to continue using remote features via 4G.
Yes, the VisionFence camera functions during nighttime mowing. However, its obstacle avoidance performance may be reduced due to lower light conditions. If your lawn has many obstacles, it is recommended to mow during the daytime or set those obstacles as off-limit islands for better results.
Yes, the requirements remain the same. In NRTK mode, if the mower loses connection with the charging station for an extended period, errors such as 4208 may occur, interrupting mowing tasks.
In theory, no. However, we do not recommend operating two robotic mowers in the same mowing area at the same time. When they encounter each other, avoidance behavior may affect the mowing path and overall efficiency.
The recommended tightening torque is as follows:· Cutting disc: 1.4 Nm· Blades on the cutting disc: 2.0 Nm
You can check maintenance and replacement recommendations for the blades and other components in the app by going to Home > Settings > Part Maintenance.
